Max* Shield Painter's Sealant


Product Details

  • Best-in-class performance1
  • Stretches over 600%2
  • 100% waterproof
  • Mold resistant3
  • 60-year limited durability guarantee4
  • Paintable
  • Low odor

Product Colors

Max Shield Painter’s sealant is a premium, advanced polymer acrylic latex sealant that is ideal for both indoor and outdoor paint projects. This sealant has strong adhesion with exceptional flexibility and is able to stretch over 600%2. Formulated with Tri-Shield Protection, this sealant is 100% waterproof, offers excellent adhesion and flexibility and lifetime mold-free product protection3.

Adheres to: common building materials including most woods, composites, brick, stone, stucco, masonry, cement board, drywall, plaster, vinyl siding, PVC, fiberglass and painted surfaces

For additional information, see product label.

1Based on comparison of publicly available manufacturers’ specifications, product meets or exceeds the flexibility performance of any ASTM C-920, Class 25 or lower commercial Paint Projects siliconized acrylic sealant.
2Based on ASTM C-920, TYPE-S, NS, CLASS 25 analysis, product can span gaps of up to 2" wide and 1/2" deep with over 600% stretch and 25% joint movement.
3Cured caulk is resistant to stain-causing mold and mildew. Regular cleaning of caulk is required however, as soap and other residue can cause secondary mold and mildew growth.
4Manufacturer warrants that this product, when handled and used as directed, will meet the above specifications for the specified number of years. If not satisfied, return proof of purchase for refund. This is the sole and exclusive remedy and Manufacturer shall not be liable for any damages in excess of the purchase price. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS.
  1. Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed.  Use backer rod for gaps larger than 1/2" x 1/2". 
  2. Cut nozzle to obtain desired bead size.
  3. Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
  4. Smooth or “tool” the caulk into gap within 3-5 minutes.
  5. Clean-up with a damp, disposable cloth; do not rinse.
  6. Protect from moisture for at least 24 hours for proper drying.
Exceeds ASTM C-920, Type-S, NS, Class 25 Use NT, G, A, M & O test and Federal Spec TT-S-00230C, Type II, Class A requirements. Exceeds C834, Type-OP, NS Grade -18°C test requirements.

Share this Product

Related Products